
Gas Line Installation & Repair in Loveland, CO
New gas line installation for appliances, and repair of existing lines, handled by licensed technicians with safety as the first step, not an afterthought.
What To Watch For
Rotten Egg Smell
The odor added to natural gas specifically so a leak is noticeable.
Hissing Sound Near A Line
An audible hiss near a pipe, meter, or appliance connection.
Dead Or Discolored Vegetation
Plants dying over a buried gas line without another clear cause.
Pilot Light Won't Stay Lit
Can point to a gas supply or pressure issue upstream of the appliance.
If You Smell Gas: What To Do Right Now
- Leave the house immediately. Do not flip light switches, use your phone inside, or light anything.
- Once you're safely outside and away from the building, call your gas utility's emergency line.
- Call us once you're safe. We coordinate the repair once the utility has secured the line.
- Do not go back inside until the utility or a technician confirms it's safe.
Running A Line For A New Appliance
Adding a gas range, dryer, water heater, generator, or an outdoor fire pit usually means running a new gas line sized to that appliance's BTU demand, not just tapping into whatever's nearby. Undersized line is a real problem, since it can starve an appliance of the gas pressure it needs to run correctly, which is why sizing the line to the actual appliance matters more than just getting a connection there at all.
Outdoor gas appliances are worth a specific mention in Loveland, since fire pits, patio heaters, and backup generators have all become more common additions in recent years. Running a line outdoors adds its own considerations beyond sizing, proper burial depth, freeze protection where the line surfaces above grade, and a code-compliant shutoff at the appliance itself. These aren't optional details, and skipping them is exactly the kind of shortcut that turns into a safety issue later rather than just a code technicality.
Adding A Gas Appliance?
We size and run the line correctly the first time.
Why This Isn't A DIY Job
Gas line work in Colorado follows the same International Fuel Gas Code framework the plumbing code references for gas piping, covering pipe material, sizing, and required shutoff placement. A permit and inspection are part of any new installation and most repairs, since this is safety-regulated work, not a cosmetic upgrade. We handle the permit and inspection scheduling as part of the job rather than leaving it to the homeowner.
A straightforward repair or reconnect on the low end, running a new line to an outdoor appliance on the high end. Exact quote after inspection.
How A Gas Line Call Works
Inspect
Locate the issue or plan the new line's path and sizing.
Permit
Required permit and inspection scheduled as part of the job.
Install/Repair
Line run or repaired to code.
Pressure Test
Full pressure test and leak check before we sign off.
Patios In Mariana Butte, Appliances In Centerra
Much of the new gas line work we see is for patio fire features and grills in hillside neighborhoods like Mariana Butte, and for range, dryer, and tankless water heater hookups in newer homes around Centerra and Boyd Lake. Every new line is pressure tested and permitted. Anyone who smells gas should leave the building and call the gas utility's emergency line from outside.
Leak Checks, Rusty Lines, And New Hookups
Callers fall into three groups. Some smell gas or want a check after a utility visit. Some notice rust on an old line. Others are adding a barbecue, a stove, or a fireplace insert.
A Check After A Suspected Leak
If you smell gas, leave the building and call the gas utility from outside. After the utility has made the area safe, a plumber can inspect the lines inside the home. If you need a statement that no leak was found, ask up front whether one is provided, since an inspection and a written report are separate requests.
Rusty Or Aging Lines
Surface rust on black iron is not always a leak, but it deserves a look when a home inspection or a renovation flags it. Describe what the inspector or contractor pointed out.
Barbecue, Stove, And Fireplace Hookups
An appliance connection needs a correctly sized line, a shutoff, and a pressure test. A fireplace insert that will not light may have a supply problem or a controls problem, and the visit starts by confirming that gas reaches the appliance.
Natural Gas To Propane
Some callers ask about converting a stove between fuels. That depends on the appliance and the supply, and it is not a service this page lists. Ask the dispatcher before booking and have the stove model number handy.
Gas Line Questions From Loveland Homeowners
Natural gas itself is odorless. Utilities add a chemical called mercaptan that smells like rotten eggs specifically so a leak is noticeable. That smell is never something to ignore.
Yes, we size and run new gas lines for appliances and fixtures, from a kitchen range to an outdoor fire pit or generator, sized to that appliance's BTU demand.
Yes, gas line installation and most repairs require a permit and inspection, since it's safety-regulated work. We handle that as part of the job.
No. Even a small leak should be handled by a licensed technician with the right detection equipment. Never use a lighter or open flame to check for a gas leak.
If you smell gas now, leave and call the gas utility from outside. Once the area is safe, a plumber can inspect the gas lines inside the home. Ask the dispatcher what the visit includes.
Appliance hookups are part of gas line work. The line is sized for the appliance, a shutoff is added, and the connection is pressure tested. Share the appliance type and location.
That depends on the appliance and the supply and is not listed on this page. Call with the stove model and the dispatcher will say whether it can be handled.